Smart Bath Bubble Machine

The machine mixes your pet’s shampoo and water at a 1:6 ratio inside the 400ml tank to produce rich, fluffy foam. Press the single button to start, and the motor pumps a steady stream of foam through the nozzle. Guide it across your pet’s coat section by section, no scrubbing, no mess. The one-button operation keeps bath time quick and stress-free for both you and your pet.

A full charge takes approximately 2.5 hours via the included USB-C cable. The onboard LED indicator turns solid when charging is complete and flashes to show battery level during use. Once fully charged, the 3.7V 1300mAh battery delivers up to 2.5 hours of continuous foam output enough for multiple back-to-back grooming sessions.

Yes. The machine is compatible with most liquid pet shampoos and shower gels. It works best with thin-to-medium consistency formulas diluted at the recommended 1:6 ratio. Avoid very thick, gel-based, or conditioner-heavy products as these may not foam properly and can clog the nozzle over time. Always use a pet-safe formula.

Absolutely. The 1:6 dilution actually reduces the concentration of shampoo on your pet’s skin compared to direct hand-lathering, making it gentler on sensitive and reactive skin. Simply choose a mild, fragrance-free, vet-approved shampoo and the machine will do the rest. The soft foam application also minimises friction, which is ideal for pets prone to skin irritation or dryness.

Yes, the Smart Bath Bubble Machine is well-suited for outdoor use, garden baths, balcony grooming, or post-walk rinses. Keep the USB-C charging port dry and away from direct water flow. Do not submerge the device. After an outdoor session, wipe the exterior dry and store in a dry location. The wireless, cord-free design makes it especially convenient outside the bathroom.

Yes, with the right shampoo. The foam is soft, low-pressure, and quiet enough for young, anxious animals. Use a puppy- or kitten-specific gentle shampoo and introduce the machine slowly, run it nearby before applying foam so they can get used to the sound. The low-noise motor is specifically designed to keep sensitive pets calm during their first few bathing sessions.

The Smart Bath Bubble Machine is designed for wet-environment use and handles splash, foam, and general bath moisture without issue. However, it should not be fully submerged or held under running water. The USB-C port and battery housing are the areas to protect and avoid direct water contact at those points. Always charge and store the device in a dry area.

Hand-lathering applies concentrated shampoo unevenly, often misses areas under thick coats, and usually results in a wet, sudsy mess. The Petverse Smart Bath Bubble Machine delivers consistent, diluted foam across the entire coat with precision and no wasted product. The foam penetrates deeper into dense fur, cleaning the skin where it matters. It also uses up to 60% less shampoo per session, keeps bath time shorter, and because it’s quieter and less hands-on, keeps your pet significantly calmer throughout.

Please use only the cable and accessories provided with your Petverse product, as they match the device's exact power needs. Using a different cable or accessory can damage the product, and any issues that result will not be covered under warranty.